Electric Vehicle Battery Tools

EV Battery Capacity Calculator

Calculate electric vehicle battery capacity, usable energy, remaining battery health and estimated driving range. Understand the difference between gross capacity, usable capacity and battery degradation.

Calculate Your EV Battery Capacity

Enter your vehicle battery specifications and current battery health to estimate available energy and remaining usable capacity.

1. Battery specifications

kWh
Total rated battery capacity, if known.
kWh
Energy available to the driver when the battery was new. Use the manufacturer's usable capacity where available.
%
Enter the battery health value from a reliable diagnostic report, if available.
%
Current battery percentage displayed by the vehicle.

2. Battery energy calculation

%
Used to calculate energy available between the current and target battery levels.
kWh/100 km
Used to estimate driving range.
%
Optional adjustment for energy not included in the selected usable-capacity figure.

3. Optional capacity estimation from charging data

If you know how much energy was added during a charging session and the change in battery state of charge, you can estimate battery capacity independently. This is an approximation, not a certified battery test.

kWh
Enter 0 to disable this optional calculation. Prefer energy measured at the battery rather than energy drawn from the grid.
%
%

Battery Capacity Results

Calculated locally
Estimated current usable battery capacity
73.15 kWh
Based on original usable capacity and battery state of health.
Gross battery capacity
82 kWh
Rated gross capacity
Original usable capacity
77 kWh
When new
Current battery health
95%
Entered SoH
Estimated capacity loss
3.85 kWh
Compared with original usable capacity
Current stored energy
47.55 kWh
At current SoC
Energy to target SoC
18.29 kWh
Additional stored energy
Estimated driving range
406 km
From 100% to 0% of estimated usable energy
Battery buffer
5 kWh
Gross minus original usable capacity
Current battery state of charge 65%
Battery state of health 95%

Charging-session capacity estimate

Estimated capacity from session
Not calculated
Based on energy delivered and SoC change
Session estimate compared with original usable capacity
Not calculated
Approximate session-derived ratio
Results are estimates based on the entered specifications. For an accurate battery health assessment, use suitable vehicle diagnostic or independent testing data.

What Is Electric Vehicle Battery Capacity?

Battery capacity describes the amount of electrical energy that an electric vehicle battery can store. It is commonly expressed in kilowatt-hours (kWh).

🔋

Gross capacity

The rated total battery energy capacity before applying the driver's usable operating window. Gross capacity is often larger than the energy available for normal driving.

âš¡

Usable capacity

The amount of energy made available within the vehicle's operating limits. It is the more useful figure for estimating driving range and available energy.

📉

Remaining capacity

The estimated usable energy remaining after accounting for battery ageing and the current battery state of health.

EV Battery Capacity Formulas

1. Battery buffer

Battery Buffer = Gross Capacity − Original Usable Capacity

2. Current usable battery capacity

Current Usable Capacity = Original Usable Capacity × (SoH / 100)

3. Battery capacity loss

Capacity Loss = Original Usable Capacity − Current Usable Capacity

4. Current stored energy

Stored Energy = Current Usable Capacity × (Current SoC / 100)

5. Energy needed to reach a target charge

Additional Energy = Current Usable Capacity × (Target SoC − Current SoC) / 100

6. Estimated driving range

Range (km) = Available Battery Energy (kWh) / Consumption (kWh/100 km) × 100

7. Capacity estimated from charging-session data

Estimated Capacity = Energy Added (kWh) / (SoC Change / 100)
These equations provide simplified estimates. Battery management systems, energy buffers, temperature and measurement methods can affect the relationship between displayed state of charge and available energy.

EV Battery Capacity Calculation Example

Consider an electric vehicle with an 82 kWh gross battery, 77 kWh original usable capacity and 95% battery state of health.

Parameter Value
Gross battery capacity 82 kWh
Original usable capacity 77 kWh
Battery state of health 95%
Current usable capacity 73.15 kWh
Estimated capacity loss 3.85 kWh
Gross-to-usable buffer 5 kWh
Current state of charge 65%
Current stored energy 47.55 kWh

This is an illustrative calculation. Actual vehicle battery capacity and buffer conventions depend on the manufacturer.

Understanding EV Battery State of Health

Battery state of health (SoH) indicates how the battery's present capacity compares with its original reference capacity. It is one important indicator of battery ageing.

Capacity degradation

Battery capacity can gradually decrease through calendar ageing and charge-discharge cycling. The rate depends on battery chemistry, temperature, operating conditions and usage patterns.

Battery diagnostics

Vehicle diagnostic systems and independent battery tests can estimate remaining capacity. Different testing methods may produce different SoH values.

Temperature and operating conditions

Battery temperature and operating conditions can affect available energy and measured performance. A temporary reduction in available energy does not necessarily represent permanent capacity loss.

Battery management systems

Battery management systems monitor cells, control operating limits and maintain safety margins. Their estimates and displayed values can influence reported capacity and SoH.

How Battery Capacity Affects Driving Range

A larger usable battery generally allows an electric vehicle to travel farther at the same energy consumption. However, actual driving range also depends on vehicle efficiency and driving conditions.

Usable capacity Consumption Illustrative range
40 kWh 15 kWh/100 km 267 km
50 kWh 18 kWh/100 km 278 km
60 kWh 18 kWh/100 km 333 km
75 kWh 18 kWh/100 km 417 km
90 kWh 20 kWh/100 km 450 km
100 kWh 20 kWh/100 km 500 km

These are mathematical estimates, not official vehicle range ratings. Real-world range varies with speed, temperature, terrain, tyres, vehicle load and climate control.

Frequently Asked Questions

1. What is EV battery capacity?

EV battery capacity is the amount of energy a vehicle battery can store, normally expressed in kilowatt-hours (kWh). Battery capacity affects how much energy is available for driving and other vehicle functions.

2. What is the difference between gross and usable battery capacity?

Gross capacity refers to the larger rated battery energy capacity, while usable capacity is the energy made available within the vehicle operating limits. Manufacturers may reserve some capacity to help manage battery operation and protect the battery.

3. What is battery state of health (SoH)?

Battery state of health is an indicator of remaining battery capability compared with its original condition. A common capacity-based calculation is current usable capacity divided by original usable capacity, multiplied by 100.

4. How do I calculate remaining EV battery capacity?

Multiply the original usable battery capacity by the battery state of health expressed as a decimal. For example, an original usable capacity of 75 kWh at 90% state of health corresponds to an estimated current usable capacity of 67.5 kWh.

5. Does a 100% battery state of charge mean the battery is completely full?

A displayed 100% state of charge normally represents the top of the vehicle-defined operating window. It does not necessarily mean every cell is charged to its absolute electrochemical limit.

6. How does battery capacity affect driving range?

A larger usable battery capacity generally provides more potential driving range at the same energy consumption. Actual range also depends on speed, temperature, driving conditions, vehicle efficiency, terrain and auxiliary energy use.

7. Can I calculate battery health from charging data?

Charging-session data can provide an approximate capacity estimate if the energy delivered to the battery and the change in state of charge are known. Charging losses, battery temperature, buffers, measurement errors and battery management system behaviour can affect the result.

8. Does battery degradation happen only when an EV is driven?

No. Battery ageing can occur through both calendar ageing and cycling. Temperature, time, state of charge, charging and discharging patterns and other operating conditions can influence battery ageing.

9. Is this calculator an official battery health test?

No. This calculator provides mathematical estimates from the values entered. A reliable vehicle-specific battery health assessment may require manufacturer diagnostic data or an independent battery test using a defined measurement procedure.

10. Can usable battery capacity increase?

An estimated usable capacity or displayed state of health can sometimes change after software updates, battery management system recalibration, temperature changes or different measurement conditions. Such a change does not necessarily mean the battery has physically recovered its original capacity.