What if your electric vehicle could do more than drive? Vehicle-to-Home technology allows compatible electric cars to send stored battery energy back to a home, helping power household appliances, complement solar energy and provide backup electricity when the system supports it.
Energy can move between a compatible EV and a home through a controlled bidirectional charging system.
Vehicle-to-Home (V2H) is a bidirectional energy technology that enables electricity stored in an electric vehicle's battery to be delivered to a residential electrical system.
In conventional charging, electricity flows from the electrical grid or another charging source into the vehicle. With V2H, a compatible vehicle and charging system can also reverse the energy flow. The vehicle becomes a mobile energy storage resource for the home.
Depending on the installation, V2H can supply selected household circuits, support home energy management, complement rooftop solar panels, or provide backup power during a grid outage.
Electric vehicles can store substantial amounts of energy. V2H makes some of that energy available to household electrical loads instead of using the vehicle battery exclusively for transportation.
Select an operating mode to see how an electric vehicle can exchange energy with a home or another electricity system.
In V2H mode, a compatible electric vehicle supplies electricity to household circuits through bidirectional charging equipment and an appropriate home electrical connection.
Simplified illustration. Actual power paths and equipment arrangements depend on the selected system.
A V2H installation coordinates the vehicle battery, power conversion, household electrical circuits and energy controls.
The driver connects a bidirectional-capable electric vehicle to a compatible charging station using the supported charging connection.
The vehicle and charging system establish communication and confirm operating limits, battery conditions and supported power-transfer functions.
Power electronics convert electricity into the form required by the home's electrical system. The conversion equipment may be inside the vehicle or external.
A home energy management system or compatible controller manages power delivery according to household demand, battery limits and configured priorities.
Protection devices and, where required, grid-isolation equipment ensure that the system operates safely and prevents unintended electricity export.
The system observes the minimum battery reserve and vehicle departure requirements so that household energy use does not consume all available driving energy.
A complete V2H system is more than an electric vehicle and a standard charging cable. The components must be designed to work together.
Bidirectional charging systems can use different power conversion architectures. The location of the inverter is one of the important differences.
In an AC bidirectional arrangement, the vehicle's onboard power electronics perform the conversion needed to deliver AC electricity. The external charging equipment coordinates and controls the energy transfer.
In a DC bidirectional arrangement, the external charging system contains the power conversion equipment needed to exchange energy with the vehicle battery and supply the home's AC system.
| Characteristic | AC V2H | DC V2H |
|---|---|---|
| Power conversion | Primarily in the vehicle's onboard power electronics | Primarily in the external bidirectional charger |
| External equipment | Bidirectional AC charging equipment and controls | Bidirectional DC charging equipment and controls |
| Vehicle requirements | Vehicle must support the relevant AC discharge architecture | Vehicle must support compatible DC bidirectional communication and power transfer |
| Home integration | Requires a suitable home electrical connection and controls | Requires a suitable inverter/output and home electrical connection |
| Compatibility | Depends on the complete vehicle and equipment combination | Depends on the complete vehicle and equipment combination |
These are general architectural descriptions. Actual system topologies differ by manufacturer and product.
A compatible solar and V2H installation can coordinate electricity generation, vehicle storage and household demand.
During periods of strong solar production, a home may generate more electricity than it immediately consumes. If the system supports the required controls, surplus solar energy can be directed into the EV battery.
When solar production falls, the vehicle may discharge stored energy to supply household loads. This can increase self-consumption of locally generated electricity.
V2H can support different household energy strategies, depending on the system's power rating and configuration.
Supply selected household circuits during a utility outage when the installation has approved backup and grid-isolation functionality.
Store surplus solar electricity in a compatible EV and use some of that energy later in the home.
Shift some household electricity use to stored energy when tariff conditions make this beneficial.
Use the EV battery as an additional energy resource alongside stationary storage, where the systems are designed to operate together.
Reduce the amount of electricity drawn from the grid during selected high-demand periods, subject to power and energy limits.
Coordinate vehicle energy with heat pumps, solar inverters, household appliances and energy-management platforms.
V2H can improve household energy flexibility, but the value of an installation depends on equipment, electricity prices, vehicle use and local rules.
These terms describe different ways of managing electricity between an electric vehicle and external systems.
| Technology | Full Name | Energy Destination | Typical Purpose |
|---|---|---|---|
| V2H | Vehicle-to-Home | Home electrical system | Household supply and possible backup |
| V2G | Vehicle-to-Grid | Electricity grid | Grid services and energy flexibility |
| V2L | Vehicle-to-Load | Individual appliances or devices | Powering equipment and portable loads |
| V1G | Unidirectional Smart Charging | Grid to vehicle only | Controlling when and how quickly the EV charges |
| V2B | Vehicle-to-Building | Commercial or other buildings | Building energy management and backup |
Estimate theoretical V2H runtime using the energy allocated to household use and the average household power demand.
Based on 20 kWh of available energy, 90% efficiency and a 2 kW average household load.
This is a simplified estimate. It does not model changing household demand, battery reserve policies, temperature, inverter limits, startup loads or manufacturer restrictions. Actual runtime may be lower.
A safe V2H installation must be designed for the intended operating modes, including what happens when utility power is interrupted.
During a power outage, a home operating from an EV battery may need to disconnect from the utility grid. This is known as islanding. Suitable transfer or microgrid interconnection equipment isolates the home's backup supply from the external network.
Without correctly designed isolation, electricity could unintentionally flow back into utility lines. This can create a serious hazard for utility workers and damage equipment.
The required arrangement depends on the system, local electrical rules and the grid operator's requirements. Installation and commissioning should be performed by qualified professionals.
Never connect a vehicle's power output directly to household wiring using improvised cables or adapters. Do not assume that a vehicle outlet can energise a home's electrical circuits. Use an approved V2H installation with appropriate isolation and protection equipment.
Compatibility must be checked across the vehicle, charger, electrical installation and control system.
Communication standards help vehicles and charging equipment coordinate energy transfer, but compatibility still depends on implementation and product certification.
ISO 15118-20 defines communication requirements between electric vehicles and charging equipment, including message sequences for bidirectional power transfer.
It is an important part of the development of interoperable bidirectional charging systems. However, the existence of a standard does not guarantee that every vehicle and charger will work together.
Read the ISO standard informationA V2H installation also needs appropriate control logic, electrical protection and coordination with the home's grid connection. Systems intended for backup operation need a safe method of separating from the utility network.
Local electrical regulations and utility requirements determine which equipment and installation approvals are needed.
Read the IEA vehicle-to-grid reportV2H is part of a wider shift toward connected homes, distributed energy storage and flexible electricity systems.
More coordinated control of vehicles, appliances and home energy systems.
More opportunities to coordinate solar generation and EV battery storage.
Improved controls for battery limits, energy availability and ageing.
Further development of communication standards and compatible products.
Answers to common questions about V2H systems, home backup, charging equipment and electric vehicle compatibility.
Additional resources for understanding bidirectional charging, V2H architecture and electrical safety.