Both Vehicle-to-Grid and Vehicle-to-Home technology allow compatible electric vehicles to send stored electricity beyond the vehicle. The key difference is where that electricity goes: the public electricity grid or a household electrical system.
Both technologies use an electric vehicle as a flexible energy resource. Their primary difference is the destination of the electricity discharged from the vehicle.
V2G enables a compatible electric vehicle to export electricity from its battery to the public electricity grid. The energy can contribute to grid flexibility, balancing and other approved electricity services.
Destination: Public gridV2H enables a compatible electric vehicle to supply electricity to a home's electrical system. The stored energy can support household consumption, solar self-consumption or backup operation where supported.
Destination: HomeSelect V2G or V2H to compare the destination and purpose of the electricity supplied by an electric vehicle.
V2G exports electricity from the vehicle battery to the public grid through an approved bidirectional charging and grid connection system.
Simplified energy-flow illustration. Actual installations may include meters, inverters, protection devices, control systems and energy aggregators.
V2G makes an electric vehicle a potential participant in the electricity system rather than only a consumer of power.
A compatible EV connects to a bidirectional charger. The vehicle, charging equipment and relevant energy management systems coordinate when the battery can charge and when electricity can be exported.
Depending on the market and service arrangement, the exported electricity may help balance supply and demand, provide frequency-related services, support local network flexibility or participate in electricity trading.
V2G participation usually requires more than a bidirectional vehicle and charger. Grid connection rules, metering, communication, contracts and market access can all be relevant.
V2H uses the vehicle battery to support electricity consumption within a home or residential installation.
A V2H system can deliver electricity from an EV battery to household loads. This can help a home use solar energy stored during the day, reduce grid consumption during selected tariff periods or support backup operation.
Some systems are designed to supply selected essential circuits, while others may support a broader household installation. The available output power and backup arrangement depend on the specific equipment.
V2H does not automatically mean that a home can operate during a power outage. Backup operation requires suitable isolation and transfer equipment and must be supported by the installation.
Compare the main technical, operational and financial characteristics of both bidirectional charging applications.
| Characteristic | V2G | V2H |
|---|---|---|
| Full name | Vehicle-to-Grid | Vehicle-to-Home |
| Primary destination | Public electricity grid | Home electrical system |
| Main purpose | Grid flexibility and energy services | Household energy supply and management |
| Energy export | Export to the public grid | Supply to home or building loads |
| Backup capability | Only if the system also supports an appropriate backup arrangement | Possible with suitable backup and isolation equipment |
| Solar integration | Can support solar-related grid flexibility | Can increase household solar self-consumption |
| Financial model | Potential grid-service payments or energy-market benefits | Potential reduction in household electricity purchases |
| Grid requirements | Grid export approval and applicable interconnection requirements | Requirements for the home connection and any backup configuration |
| Metering | Grid export and settlement metering may be required | Home energy metering is useful; requirements vary by system |
| Control system | May involve an aggregator, utility or energy market controller | Often coordinated by a home energy management system |
| Potential revenue | Possible direct payments under suitable programmes | Usually indirect value through household energy savings |
| Compatibility | Vehicle, charger, grid and service must be compatible | Vehicle, charger and home installation must be compatible |
The table describes general applications. Specific capabilities, approvals and financial arrangements vary by product, country and electricity market.
The two technologies can provide different kinds of value to EV owners, homes and the wider electricity system.
Bidirectional charging is developing, but technical, regulatory and economic barriers remain.
The financial outcome depends on electricity prices, equipment costs, system efficiency and how often the vehicle is available for energy transfer.
V2G can create financial value when an EV participates in an approved grid service or electricity market arrangement. Depending on the programme, compensation may be linked to exported energy, available capacity, response or other services.
The owner should consider export prices, charging costs, service fees, taxes, battery use and the conditions of the energy contract.
V2H can provide indirect savings by reducing the amount of electricity purchased from the grid. A home may use stored EV energy during expensive tariff periods or use more of its own solar generation.
The value depends on the difference between the cost of charging and the value of the electricity later used, after accounting for conversion losses and equipment costs.
Both technologies can interact with solar generation, but they use stored electricity in different ways.
A home energy management system can direct surplus solar electricity into a compatible EV. Later, when solar production is lower, the vehicle can supply electricity to household loads.
The main objective is often to increase household consumption of locally generated solar energy and reduce grid purchases.
A compatible V2G system can store electricity in the vehicle and later export energy to the public grid when an approved grid service or market arrangement calls for it.
The objective can include providing flexibility to the electricity system and supporting the integration of variable renewable generation.
A vehicle supporting bidirectional power transfer is only one part of the compatibility question.
Bidirectional charging requires communication between vehicles and charging equipment, along with appropriate electrical protection and grid compliance.
ISO 15118-20 defines communication between electric vehicles and charging equipment, including messages and sequences related to bidirectional power transfer.
It is an important standard for developing interoperability between compatible EVs and chargers. However, implementation differences mean that the standard alone does not guarantee universal compatibility.
Read the ISO standard informationV2G systems must comply with applicable grid connection requirements for equipment that can export electricity. Protection, metering, power quality and control requirements are important.
V2H systems must also meet applicable electrical installation requirements. Backup configurations need suitable isolation from the public grid.
Read the IEA V2G technology reportSwiss EV owners should check equipment compatibility, electrical installation requirements and the conditions of their local distribution network.
A Swiss home installation must be designed for the relevant electrical supply, protection and backup configuration. The vehicle and bidirectional charger must be approved for the intended use.
If backup operation is required, confirm how the installation isolates the home from the distribution network during a power outage.
Exporting electricity to the public grid requires attention to the applicable Swiss grid connection, metering and technical requirements. The relevant distribution network operator and energy service provider may need to be involved.
Confirm whether a suitable V2G tariff, flexibility service or energy-market arrangement is available before making an investment.
This section is general information, not a statement that every V2G or V2H product is currently approved or commercially available in Switzerland.
The most appropriate technology depends on what you want your electric vehicle to do when it is connected.
Answers to common questions about the differences, applications and requirements of V2G and V2H technology.
External resources for additional information about vehicle-to-grid and vehicle-to-home technology.