1. Battery information
2. Battery ageing assumptions
Battery degradation results
Estimated battery health
Calculation breakdown
| Annual driving energy | — |
|---|---|
| Annual total discharge throughput | — |
| Annual equivalent full cycles | — |
| Estimated total capacity degradation | — |
| Future additional capacity loss | — |
Results are model-based estimates and should not be interpreted as a diagnostic measurement or a battery warranty assessment.
How the Battery Degradation Calculator Works
The calculator estimates capacity fade using two simplified degradation components: calendar ageing and cycle ageing. It combines driving energy consumption with optional V2G discharge throughput to estimate equivalent full cycles.
1. Calendar ageing
Calendar ageing represents capacity loss over time, even when the vehicle is not being driven. The calculator uses a user-defined annual degradation rate as a simplified assumption.
Calendar loss (%) = Battery age × Annual calendar degradation rate
2. Cycle ageing
Cycle ageing is associated with charging and discharging energy throughput. The calculator estimates equivalent full cycles from total discharged energy divided by original usable battery capacity.
Annual driving energy (kWh) = Annual distance × Consumption ÷ 100
Annual throughput (kWh) = Driving energy + V2G discharged energy
Equivalent full cycles = Total throughput ÷ Original usable battery capacity
Cycle loss (%) = Equivalent full cycles × Cycle degradation rate per 100 cycles ÷ 100
3. Total degradation and remaining capacity
The simplified model adds calendar and cycle capacity loss. Estimated remaining capacity is calculated by subtracting the combined loss from original usable capacity.
State of health (SoH) = Remaining capacity ÷ Original usable capacity × 100
What Causes EV Battery Degradation?
Calendar ageing and time
Batteries gradually age even when they are not actively cycling. Storage temperature and the average state of charge can influence the speed of this process.
Charging and discharging cycles
Repeated charging and discharging contribute to cycle ageing. The impact depends on the battery chemistry, current, operating temperature and depth of discharge.
High battery temperatures
Prolonged exposure to elevated temperatures can accelerate degradation. Thermal management systems help control battery operating conditions.
High state of charge
Long periods at a high state of charge can increase calendar ageing for some lithium-ion battery chemistries. The actual effect varies by cell design and chemistry.
Vehicle-to-grid operation
V2G operation adds energy throughput because the vehicle battery can discharge electricity to the grid as well as charge from it. Its actual degradation impact depends on operating strategy, temperature, charging rates, state-of-charge range and the battery's chemistry.
How to Reduce EV Battery Degradation
- Follow the vehicle manufacturer's charging recommendations.
- Avoid prolonged exposure to extreme battery temperatures.
- Use battery preconditioning when recommended by the manufacturer.
- Limit unnecessary high-power charging when practical.
- Avoid leaving the battery at very high or very low charge levels for extended periods.
- Use V2G schedules that respect battery operating limits and manufacturer guidance.
- Monitor battery health through reliable vehicle diagnostics.
Frequently Asked Questions
1. What is EV battery degradation?
EV battery degradation is the gradual reduction in usable battery capacity and other performance characteristics. It occurs through calendar ageing and cycle ageing.
2. What does 90% battery state of health mean?
A capacity-based SoH of 90% means the battery has approximately 90% of its original usable capacity remaining, using the same measurement basis.
3. Does V2G cause additional battery degradation?
V2G increases energy throughput, but the additional degradation depends on how the battery is operated. Temperature, charging rates, depth of discharge, chemistry and control strategy all influence the outcome.
4. What is an equivalent full cycle?
An equivalent full cycle represents cumulative energy throughput equal to the battery's usable capacity. Several partial charge and discharge events can add up to one equivalent full cycle.
5. Can I use this calculator for any EV battery?
You can use it for an illustrative estimate, but the default degradation rates are not chemistry-specific. Actual results differ between battery designs, manufacturers and operating conditions.
6. Is the calculated battery health the same as a diagnostic test?
No. This calculator estimates capacity loss from assumptions. A diagnostic test or reliable measured usable capacity is needed to assess the actual battery condition.
7. Does battery degradation reduce EV driving range?
Capacity loss generally reduces the energy available for driving and can therefore reduce the vehicle's potential range. Actual range also depends on speed, weather, temperature and driving conditions.